AXIS

 

 

7500
flag_ger

TWIN POWER  EXV-7500
EXCALIBUR TWIN POWER bietet nicht weniger als unglaubliche 750 Watt Power. Eine Röhren – oder Transistor-Vorstufe und zwei Leistungsendstufen arbeiten im BIAMP, STEREO- oder MONO- Betrieb. Dies erlaubt die Kombination mit einer großen Anzahl von verschiedenen Lautsprecher Cabinets, bei einer Power – Leistung von 200 bis 750W an 2 bis 16 Ohm. Der Verstärker besitzt eine sehr effiziente und zugleich auch leicht zu bedienende Klangregelung. Ein Opto Coupler Limiter der einzigartig schnell und geräuschlos arbeitet, ist auch eingebaut. Für diejenigen, die eine unabhängige Klangregelung für jeden Kanal bevorzugen, gibt es die Möglichkeit, den TWIN POWER mit einer zusätzlichen Vorstufe zu verbinden. Durch das Einschleifen einer zusätzlichen Vorstufe in den Amp, erhält man zwei voneinander unabhängige, schaltbare Kanäle. Dieses zusätzliche Anwendung, eines Preamps ermöglicht eine ganze Reihe von neuen Soundmöglichkeiten. Zwei identische Kanäle mit getrennten Einstellungen von: Ton, Limiter und Lautstärke. Der Musiker kann seine bevorzugten Sounds einstellen, Empfindlichkeit, Tube-Sättigung, Volumen und Kompression für jeden Kanal unabhängig eingeben und zwischen den Kanälen umschalten. Ein Effektgerät kann mit jedem der Kanäle verbunden werden. Ein praktisches 2 HE EDELSTAHL Gehäuse ermöglicht eine leichte Rackmontage. Spiele über Deinen passiven Lieblingsbass oder einen aktiven clean Hi-tech Bass, egal, der EXCALIBUR TWIN POWER bringt Deinen Sound exakt rüber.

Power output:
mono - 750 W/4 ohm, 600W/8ohm , 400W/16ohm Biamp./stereo - 2x375W/2ohm , 2x300W/4ohm , 2x200W/8ohm
2 preamps /tube and transistor /
Preamp configuration: 1 internal channel + 1 external channel used to
connect a separate preamp channels selected by foot switch
INPUT - passive & active
BALANCE control between the power amps
GAIN control with overload LED
INPUT MIX fluent signal adjustment of the input between
two sections of the amplifier - tubes and transistors
VOLUME control TONE
BASS and TREBLE equalizer PARAMETRIC EQUALIZER for precise control of middle range
B-HARMONIC - increases dynamics and selectivity of bass sound
PRESENCE button - increases transparency of sound
PUNCH button - increases sonic accuracy
Studio quality optocoupler COMPRESSOR/LIMITER
MUTE button
CLIP power amp control
FOOT SWITCH input [switches the additional preamp connected
to AUX-2]
Effect loops: AUX-1 for serial and parallel configuration, AUX-2 parallel for external preamp with foot switch selectable
internal and external channels
XLR balanced line output with level control, speaker cabinet simulation, PRE/POST switch and GROUND LIFT circuit switch
Outputs: PREAMP OUT, TUNER, PHONES, SPEAKER
 [SPEAKON / JACK combo connector]
Protections: short circuit, thermal overload, power overload, speaker protection
Muted on/off switch
Dimensions: 19” /2 rack spaces [H x W x D] 88x483x370 mm    Weight: 9,5kg

Tube
flag_uk

TWIN POWER  EXV-7500
EXCALIBUR TWIN POWER is housed in an enforced 2U rack space HIGH GRADE STEEL chassis, with no less than 750 Watts of incredible power, and can be loaded down to 2 ohms speaker load. Tube and transistor preamps and double power stage, working in BIAMP, STEREO or MONO modes. The switchable mode enables wide range of speaker cabinets to connect varying in impedance from 2 to 16 Ohm and handling power from 200 up to 750 W. The amplifier uses a very efficient and at the same time easy to operate own unique equalization control for fast and accurate sound tailoring. Unique optical limiter is built in for fast and noiseless operation. For those who prefer an independent tone control for each channel there is a possibility to cross the amplifier with an additional preamp. Connecting an external preamp creates a configuration of two selectable independent channels. The use of additional preamp brings a wide range of new sound creation opportunities: two identical panels with separate input stage control, tone, limiter and volume. A musician can set preferred tone shape, input sensitivity, tube saturation, volume and compression for each channel independently and switch between the channels while playing. Also an external sound effect can be connected to each of the channels. Whether you plug in a passive old favorite or an active, clean hi-tech bass, you will find that the EXCALIBUR TWIN POWER can Sound it.

© 2005 Schmidt & Hasenmaier Germany Alle Rechte Vorbehalten / All rights reserved